ASN welcomes the opportunity to work collaboratively with you and your organisation.
To begin the access audit (either desktop or onsite) process please use the form below. It is essential that the square meterage (when applicable) is accurately selected and the timeframe nominated.
If you require an official quotation please email requests for quotes to firstname.lastname@example.org – We will provide a quote within 24hrs.
If you require further information or assistance please feel free to contact us.
Access Audit Submission Form
One of ASN’s values is Excellence – to ensure we provide the highest of Quality, Value and Distinction, we ask our clients to choose a payment method (shown below) – These payment method determine the timeframe in which the disability access audit report is delivered to the client. In most cases reports are issued the same day the access audit is undertaken.
Pre - PaidPay before ASN commences works.
Reports within 3 - 5 Business Days
CompletedPay once ASN have completed the works.
Reports within 6 - 9 Business Days
AccountPay 14 days after works & reports have been received.
Reports within 8 - 10 Business Days
Book an Access Audit Today & We'll Help Increase Your Accessibility
If there is anything that we can assist with – just ask.
ASN’s disability access audits are extremely comprehensive and include multiple elements. Likely elements to be audited are, but not limited to:
Mandatory Items (MR):
- Car Parking: including ratios, required numbers of bays, signage, delineation, gradient and kerb ramp provisions. Also, the locations of bays will also be audited.
- Pathways: all pathway systems from the allotment boundary and to and within the premises will be audited. Further to this, the principal entrance points will also be assessed.
- Ramps: there are numerous requirements for ramps to achieve compliance. Therefore, each ramp will be audited accordingly against specific requirements determined by the type of ramp it is.
- Tactile Ground Surface Indicators (TGSI’s): both directional and hazard TGSI’s are audited against the requirements of Australian Standard AS1428.4.1 – 2009 and according to the types integrated, discrete and composite discrete.
- Signage: identifying accessible features as well as navigational/informational signage is required to meet the BCA deemed to satisfy provisions.
- Luminance Contrast: probably one of the most complex areas within disability access. ASN is considered by peers as an expert in luminance contrast.
- Walkways: like ramps, walkways to have numerous requirements to achieve compliance. Each walkway will be audited accordingly
- Stairs: Stairs must be assessed to ensure there are compliant treads, risers, and nosings. Other stair requirements such as handrails and TGSI’s will also be audited.
- Doorways: doorways will be audited as there are width, force, swing, and luminance contrast requirements. These will all be audited for all doorways to and within.
- Circulation Spaces: there are many situations within the built environment where it is required for correct circulation spaces to be provided, such as at doorways. All requirements for circulation spaces are included in our auditing.
- Handrails: the design and installation of handrails must be in accordance with the Australian Standards, mostly AS1428.1 – 2009. Every handrail required to comply will be audited.
- Grabrails: the design and installation of grabrails must be in accordance with the Australian Standards, mostly AS1428.1 – 2009. Every grabrail required to comply will be audited.
- Gradients: all graded surfaces will be audited. Gradients such as, 1:8, 1:10, 1:14, 1:20, 1:33 & 1:40.
- Lifts: there are different types of lifts and hence different requirements for minimum compliance. Lifts will be audited according to type.
- Sanitary Facilities: have the most specific and extensive set of requirements. There are specific requirements for unisex accessible sanitary compartment, showers, ambulant sanitary facilities, and change rooms. ASN’s auditing includes such building areas.
Advisory Items (AR)*:
- Lighting Levels: minimum LUX levels are required within different setting types. LUX levels will be recorded and audited accordingly against the specific setting.
- Fittings & Fixtures: counters, customer service, seating, controls, classrooms, vending machines, information stand and the like are audited and assessed to ensure ease of use for a wide range of people.
- Emergency Egress: it is essential that as the accessibility into a building is audited that the same be for the emergency egress from a building. This is particularly important since the release of the Australian Standard AS3745.
- Wayfinding: although wayfinding is silent in the Australian Standards our auditing is inclusive of assessing the interaction of required elements such as TGSI’s & signage, to ensure these provide good wayfinding information and meaning. As a result, increasing the accessibility.
- Services: delivery of services must be in an accessible form. Although service delivery cannot be directly audited against a set Australian Standard, ASN assesses service delivery against industry be practices.
*Advisory items will be assessed/audited at the descretion of the auditor.
Dale Sheppard - Director
With more than 25 years of experience within the disability sector ensures an in-depth knowledge of the issues and requirements for people with disability. Use the buttons below or click here for Dale’s Bio and click here for more information about ASN.
Get In touch
Send us a message
We provide both onsite & desktop disability access audits. Access audits provide a comprehensive report and we work along side governments, design teams, owners, companies etc.
A performance solution report is where a deemed to satisfy provision is not met and an alternative building solution is proposed. The performance solution report is to articulate how the building solution is equal to or greater than that of the minimum requirement.
More and more requests are being made of product suppliers to provide a disability access compliance certification. ASN specialises in these certifications for suitability and usability of mainstream products for people with disability.
A luminance contrast test is a calculation between two (2) surfaces Light Reflectance Values (LRV’s). This determines the percentage of difference and is used to confirm compliance or deem not compliant.